The Linux firewall is a great way to secure a server, especially one that is Internet facing. Together with ipset and an appropriate blacklist, it can protect your server from the worst the Internet can throw at it. However, netfilter (aka iptables), can generate a lot of messages. By default they go to the kernel logging channel, flooding out log files such as messages, syslog and kern.log.
It is important to keep log files clear so that system issues are not missed. For example, a hardware or memory error message might be written to kern.log, but could be difficult to notice due to many thousands of firewall messages. Worse, over time, the important message will be moved into a historical log files due to the action of logrotate.
This article explains how to send firewall messages to their own log file, using the example of a Raspberry Pi running Raspbian 9 (Debian Stretch). After a small configuration change, netfilter messages go to their own file instead of clogging up the general logs.
Iptables is the name of the firewall built into the Linux kernel. It is also the tool used for firewall configuration. This post explains how to use iptables with a range of IP addresses and/or ports. It could be used, for example, to allow SSH traffic from a number of systems. Or to open up a range of ports with a single firewall rule.
Note: This article is not about blacklisting. If you are looking to set up a blacklist, perhaps to protect your server from a number of unrelated IP addresses, my related procedure on how to protect your webserver with IPset might be more appropriate.
The Linux firewall (part of the Netfilter project) is important on Internet facing systems, “edge” servers and “jump” boxes. Particularly when they do not sit behind another protective network element such as a load balancer or discrete firewall. For example, standaline cloud instances that are not part of a protected VPC infrastructure. Continue reading →
The Linux packet filter provides an easy way to protect against unwanted network intrusions. Often referred to simply as “iptables“, it is a basic firewall built into the Linux kernel. Iptables is most useful, perhaps, on those servers most susceptible to attack, such as LAMP systems, content management servers and blogging platforms like WordPress, especially where they are Internet facing.
Ipset is a fairly recent addition to Linux, having been introduced into kernel version 2.6.32. This means it is supported in Debian 7 and 8, as well as Red Hat 6 onwards. In short, ipset allows a large number of IP addresses to be blocked in an efficient way, as demonstrated below. Continue reading →